[Konvas] 250mm vs 135mm Jupiter lens test

[olivier satnet]

for me work perfectly at still frame !!!
If your theory is good ... 

what happend switching  KONVAS at 1FPS or one frame each 5 or 10 sec on time lapse shooting ?
versus the same konvas at 24fps !!! 

I have done boths , at Wide open and focus is FOCUS !!!film have a "right position" at many speeds ...




Of course, some thinks can only be done at running speed like "fixity", and registers tests ...or a 500fps camera is some kind different "physical" system than time lapse ...

my 3 "pesos"  contribution ...

Olivier . 





  ----- Original Message ----- 
  From: H. W. Stone 
  To: cinema at konvas.org 
  Sent: Thursday, September 25, 2008 10:49 AM
  Subject: Re: [Konvas] 250mm vs 135mm Jupiter lens test


  Part of the "cine focus and use" problem is that "still frames" do not match frames at 24fps.  The film is floating, comes to a rest, is snugged, exposed, and then floated again when you are running at speed.  This is the reason you test and check high speed cameras at the speed you will be shooting, and not just to some standard for everything.  

  On the Konvas and Arri II series the camera does NOT snug the frame-- in any camera with locking pins it does snug the frame, but even for an Arri II you should test focus distance and focus quality at 24fps, not at a lower speed or by stills.  

  There is a painful difference.





  -----Original Message-----
  From: olivier satnet <firefly at uio.satnet.net>
  To: Konvas Discussion List <cinema at konvas.org>
  Sent: Thu, 25 Sep 2008 11:18 am
  Subject: Re: [Konvas] 250mm vs 135mm Jupiter lens test


first of all , I AM VERY INTERESTED IN DOING THE SMAE THING with my Pentacon
six teles
(120, 150,180,250 and 500mm !) wich adapter you use ?

Another way : I have used this to do tests for colimation of lenses !
with a 36 exposure slide film or negative , i have enought frames to can
calibrate 6 lenses , from
0 to +1,+2,+3,+4,+5 in milimeter scale on the lens focus barrel
and -1,-2,-3,-4,-5, ...

so with this system i konw if i am Less or More Flange on the lens
colimation ...

of course , the first test is calibration of Viewfinder ! ...

i have to do this because NO film lab in the counntry ... so a simple photo
one hour lab , and that,s is ...

The use of flash (studio flash, softbox, lightmetered of course !) ... give
me a SHARP exposure
i habe place a mark in the white know of the motor for "open" and "close"
Shutter ....
and i fire the flash with my Minolta lightmeter ....

IT is Soooo much efficient than filming at 8FPS !!!
 

------------------------------------------------------------------------------
  Find phone numbers fast with the New AOL Yellow Pages! 


------------------------------------------------------------------------------


  _______________________________________________
  Cinema mailing list
  Cinema at konvas.org
  http://konvas.org - All about Konvas, Kinor and other Russian Cinema Cameras

  Be sure to Check out the online Forums:
  http://konvas.org/forum/index.php

  Visit the discussion archives:
  http://konvas.org/list-archives.html

  Join the Konvas Discussion List:
  http://konvas.org/mailman/listinfo/cinema_konvas.org

  Please be kind when replying and crop the replied message!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://konvas.org/pipermail/cinema_konvas.org/attachments/20080925/00007ce4/attachment.html>