[Konvas] red adapter problem

[Brad Leong]

thanks you Lael that's perfect info!

Looking for the adapter to put oct18s on my oct19 mount.

Respectfully,
Brad


--- On Mon, 1/26/09, Camak, Lael (US - MGTTS) <Lael.Camak at meggitt.com> wrote:

> From: Camak, Lael (US - MGTTS) <Lael.Camak at meggitt.com>
> Subject: RE: [Konvas] red adapter problem
> To: bradkonvas at yahoo.com, "Konvas Discussion List" <cinema at konvas.org>
> Date: Monday, January 26, 2009, 3:22 PM
> Hey Brad, 
> 
> Yes, my Lomo OCT19 adapter for my Red had to be cut for
> clearance for
> the tab on all my high speed lenses.  Attached is a pic of
> my 50C.  It
> required the widest clearance cut.  The pic you see is what
> was cut out
> of the back of the Lomo mount for my Red.
> 
> On the adapter (I've never used it), was Raf's an
> OCT18 lens to fit on
> an OCT19 mount or the reverse?
> 
> Michael Fourman of Kievcamera.net may have them.
> 
> All the best, 
> lael  
> 
> >On Behalf Of Brad Leong
> I just finished making a red adapter for my lomo set. 
> Works great
> except for when I try to use my 18mm on it.  The 18 seems
> to have a
> little tab on the lower back of the lens that hits the
> mount.  Has
> anyone else had this problem?  I'm going to try and
> skim a little off
> the mount but there isn't much room to wiggle.  Does
> anyone know what
> the exact clearance is from mount to mirror on a konvas?
> 
> Also what's the deal with oct19 to oct18 conversion. 
> Raf used to have a
> simple little adapter if I remember correctly but I
> can't find it
> anymore.  Does anyone have one of these for sale?
> 
> 
> This email may contain proprietary information and/or
> copyright
> material. This email is intended for the use of the
> addressee only.
> Any unauthorized use may be unlawful. If you receive this
> email by
> mistake, please advise the sender immediately by using the
> reply
> facility in your email software.
> 
> Information contained in and/or attached to this document
> may be
> subject to export control regulations of the European
> Community, USA,
> or other countries. Each recipient of this document is
> responsible to
> ensure that usage and/or transfer of any information
> contained in
> this document complies with all relevant export control
> regulations.
> If you are in any doubt about the export control
> restrictions that
> apply to this information, please contact the sender
> immediately.
> 
> Be aware that Meggitt may monitor incoming and outgoing
> emails to
> ensure compliance with the Meggitt IT User policy.