[Konvas] manual .... electonics ....kinor 2 perf .

[olivier auverlau]

Hi, the guys on AZ spectrum say me that :
 
Hi Oliver,

We did not design the electronics for this camera, we just repaired it. The electronics were made by The Aranda Group, Melbourne, Australia. You can e-mail Bruce McNaughton at bruce at arandafilm.com.au to get correct answers for your questions. The camera electronics have 12v and 5V voltage regulators (LM78 series). The top voltage for these regulators is 30V. If you are using 24V NiCd battery then after a full charge the battery voltage can reach 30 V level. I prefer to use 18V battery. Please check the power cable, the film switch and the door switch.  

Best regards,
Andrew Zorawski

www.az-spectrum.com

  ----- Original Message ----- 
  From: vonat8 at verizon.net 
  To: cinema at konvas.org 
  Sent: Friday, June 19, 2009 4:59 PM
  Subject: Re: [Konvas] manual .... electonics ....kinor 2 perf .


  Olivier,

  That looks almost exactly the same as mine.  

  Terry


  Jun 19, 2009 11:23:08 AM, cinema at konvas.org wrote:

     
    Hi Terry , thasnks for the manual , mine was not made by Anders Banke ,,... but by A-Z-spectrum electronics in NYC ....
    so i am not sure it will be the sames ... 
    here picture of my front panel 


      ----- Original Message ----- 
      From: vonat8 at verizon.net 
      To: cinema at konvas.org 
      Sent: Friday, June 19, 2009 7:20 AM
      Subject: Re: [Konvas] shooting 1 fps with KINOR 2 perf ....


      Olivier,

      I sent you the manual off-list last night.  Did you get it?  Also, I have the same problem with the run/stop switch on my Kinor.  I solved it by putting another switch in the power cord.  After your post I took a close look at it and I believe the switch is faulty.  It doesn't move all the way into the "stop" position.  I think I'll replace my switch...

      According to the manual, running the camera with the inching button should not damage the electronics.  It makes an awful screeching sound, but it doesn't hurt the camera.

      The explanations of the mysterious letters that appear on the display screen are in the manual too.  ("USA" means it's measuring the film in feet not meters, "SAF" is a prompt to save the footage count, etc.)

      Terry


      Jun 18, 2009 08:37:20 PM, cinema at konvas.org wrote:

        someone know if i can shoot normally simply pushing the "INCH" button on my kinor .... i see than the camera look running at 1FPS (one frame per second) during all time i keep the button pushed ...

        so it look great make a slow speed shooting (time lapse) at 1FPS ... 
        my question is : it can be done without problem for electronic ???

        what is the real function of the "inch" button ???? 

        sometimes i have "USA" word , and "SAF" word appear on my display .... sometimes only the "F" letter .....

        what can be the causes ???? 

        anybody heve a kind of manual of this display seting pànel ? 
        all is OK, but sometimes stranges things happend like the camera run with ON OFF button in OFF !!! 

        maybe it is a Ghost inside the body !!!! 

        Olivier . 


------------------------------------------------------------------------

        _______________________________________________
        Cinema mailing list
        Cinema at konvas.org
        http://konvas.org - All about Konvas, Kinor and other Russian Cinema Cameras

        Be sure to Check out the online Forums:
        http://konvas.org/forum/index.php

        Visit the discussion archives:
        http://konvas.org/list-archives.html

        Join the Konvas Discussion List:
        http://konvas.org/mailman/listinfo/cinema_konvas.org

        Please be kind when replying and crop the replied message!!!



--------------------------------------------------------------------------


      _______________________________________________
      Cinema mailing list
      Cinema at konvas.org
      http://konvas.org - All about Konvas, Kinor and other Russian Cinema Cameras

      Be sure to Check out the online Forums:
      http://konvas.org/forum/index.php

      Visit the discussion archives:
      http://konvas.org/list-archives.html

      Join the Konvas Discussion List:
      http://konvas.org/mailman/listinfo/cinema_konvas.org

      Please be kind when replying and crop the replied message!!!



----------------------------------------------------------------------------

    _______________________________________________
    Cinema mailing list
    Cinema at konvas.org
    http://konvas.org - All about Konvas, Kinor and other Russian Cinema Cameras

    Be sure to Check out the online Forums:
    http://konvas.org/forum/index.php

    Visit the discussion archives:
    http://konvas.org/list-archives.html

    Join the Konvas Discussion List:
    http://konvas.org/mailman/listinfo/cinema_konvas.org

    Please be kind when replying and crop the replied message!!!



------------------------------------------------------------------------------


  _______________________________________________
  Cinema mailing list
  Cinema at konvas.org
  http://konvas.org - All about Konvas, Kinor and other Russian Cinema Cameras

  Be sure to Check out the online Forums:
  http://konvas.org/forum/index.php

  Visit the discussion archives:
  http://konvas.org/list-archives.html

  Join the Konvas Discussion List:
  http://konvas.org/mailman/listinfo/cinema_konvas.org

  Please be kind when replying and crop the replied message!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://konvas.org/pipermail/cinema_konvas.org/attachments/20090619/f248259c/attachment.html>